POSTECH

교원프로필

교원에 대한 정보를 나타내는 표입니다.
성명	강윤배
소속	친환경소재대학원
전화번호	279-9032
E-mail	ybkang@postech.ac.kr
Homepage	http://sites.google.com/site/cslgiftpostech/

학력

2000.03 ~ 2005.02 포항공과대학교 (박사-신소재공학)
1998.03 ~ 2000.02 포항공과대학교 (석사-신소재공학)
1994.03 ~ 1998.02 포항공과대학교 (학사-신소재공학)

주요경력

2008.04 ~ 2009.10 : Ecole Polytechnique de Montreal Center for Research in Computational Thermonhemistry
2005.04 ~ 2008.03 : Ecole Polytechnique de Montreal Center for Research in Computational Thermochemistry
2005.02 ~ 2005.03 : POSTECH 금속재료기술혁신센터

전문분야

펼쳐보기

학술지

국제전문학술지

Dissolution kinetics of alumina in molten CaO-Al2O3-FetO-MgO-SiO2 oxide representing the RH slag in steelmaking process, JOURNAL OF THE AMERICAN CERAMIC SOCIETY, , 103, 2210-2224 (2020)
Kinetics of CO Gas Dissolution into Stirred Liquid Fe at 1 823 K and Its Impact on Nozzle Clogging during Continuous Casting, ISIJ INTERNATIONAL, , 60, 258-266 (2020)
The Uniqueness of a Correction to Interaction Parameter Formalism in a Thermodynamically Consistent Manner, METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, , 51, 795-804 (2020)
Growth of Initial Clog Deposits during Continuous Casting of Ti-ULC Steel - Formation and Reduction of the Initial Deposits at Nozzle/Steel Interface, ISIJ INTERNATIONAL, , 60, 426-435 (2020)
Critical evaluation and thermodynamic modeling of the Fe-P and Fe-C-P system, CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY, , 70, - (2020)
Experimental Study of High Temperature Phase Equilibria in the Iron-Rich Part of the Fe-P and Fe-C-P Systems, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 51, 5351-5364 (2020)
Consideration of phase equilibria in Fe-Al-Ti-O system and its importance in steel cleanliness during casting process, Metallurgia Italiana, , 111, 5-11 (2019)
Influence of Al/Ti Ratio in Ti-ULC Steel and Refractory Components of Submerged Entry Nozzle on Formation of Clogging Deposits, ISIJ INTERNATIONAL, , 59, 749-758 (2019)
A Reaction Between High Mn-High Al Steel and CaO-SiO2-Type Molten Mold Flux: Reduction of Additive Oxide Components in Mold Flux by Al in Steel, METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, , 50, 2077-2082 (2019)
Oxide Solubility Minimum in Liquid Fe-M-O Alloy, METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, , 50, 2942-2958 (2019)
Evaporation of S from Liquid Fe-C-S Alloy, ISIJ International, , 58, 10-16 (2018)
Evaporation of Cu, Sn, and S from Fe-C-Cu-Sn-S Liquid Alloys in the Temperature Range from 1513 K to 1873 K (1240 degrees C to 1600 degrees C), METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS, , 49, 1089-1100 (2018)
Electrochemical Transfer of S Between Molten Steel and Molten Slag, METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS, , 49, 1311-1321 (2018)
A Reaction between High Mn-High AI Steel and CaO-SiO2-Type Molten Mold Flux: Reaction Mechanism Change by High Al Content ([pct AI](0)=5.2) in the Steel and Accumulation of Reaction Product at the Reaction Interface, ISIJ International, , 58, 686-695 (2018)
Development of a multicomponent reaction rate model coupling thermodynamics and kinetics for reaction between high Mn-high Al steel and CaO-SiO2-type molten mold flux, CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY, , 61, 105-115 (2018)
Oxidation of Ti Added ULC Steel by CO Gas Simulating Interfacial Reaction between the Steel and SEN during Continuous Casting, ISIJ INTERNATIONAL, , 58, 1257-1266 (2018)
Oxide Stability Diagram of Liquid Steels - Construction and Utilization, ISIJ International, , 58, 1371-1382 (2018)
Electrochemical Desulfurization of Molten Steel with Molten Slag: Reaction Rate and Current Efficiency, JOURNAL OF THE ELECTROCHEMICAL SOCIETY, , 165, E816-E825 (2018)
Special Features of Precipitation of epsilon-Cu Phase in Cast Irons Alloyed with Copper and Aluminum, METAL SCIENCE AND HEAT TREATMENT, , 60, 150-157 (2018)
Composites of copper and cast iron fabricated via the liquid: In the vicinity of the limits of strength in a non-deformed condition, MATERIALS CHARACTERIZATION, , 130, 260-269 (2017)
Reassessment of Oxide Stability Diagram in the Fe-Al-Ti-O System, ISIJ INTERNATIONAL, , 57, 1665-1667 (2017)
Prediction of Phase Separation of Immiscible Ga-Tl Alloys, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, , 48, 3130-3136 (2017)
Critical Evaluations and Thermodynamic Optimizations of the MnO-Mn 2 O 3 -SiO 2 and FeO-Fe 2 O 3 -MnO-Mn 2 O 3 -SiO 2 Systems, Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science, , 48, 1721-1735 (2017)
Distribution of Alumina in Aluminum Prediction Based on Thermodynamic and Diffusion Analysis, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, , 48, 2697-2700 (2017)
Reassessment of Oxide Stability Diagram in the Fe-Al-Ti-O System (vol 57, pg 1665, 2017), ISIJ INTERNATIONAL, , 57, 2269-2269 (2017)
Thermodynamic modelling of oxide phases in the Fe-Mn-O system (vol 98, pg 237, 2016), JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS, , 101, 90-90 (2017)
Thermodynamic Modeling of Fe-C-S Ternary System, ISIJ INTERNATIONAL, , 57, 782-790 (2017)
Study on Oxide Inclusion Dissolution in Secondary Steelmaking Slags using High Temperature Confocal Scanning Laser Microscopy, STEEL RESEARCH INTERNATIONAL, , 87, 57-97 (2016)
A Novel Technology to Develop a Nickel-Enriched Layer on Slab Surface by Utilizing NiO-Containing Synthetic Powder, METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, , 47, 779-787 (2016)
FactSage Thermochemical Software and Databases, 2010 - 2016, CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY, , 54, 35-53 (2016)
In-situ X-ray fluoroscopic observation for motion of bubbles in liquid iron for correction of drag coefficient used in numerical simulation, METALS AND MATERIALS INTERNATIONAL, , 22, 681-693 (2016)
Evaporation Mechanism of Cu from Liquid Fe containing C and S, METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, , 47B, 2164-2176 (2016)
Simultaneous Evaporation Cu and Sn from Liquid Steel, METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, , 47B, 2564-2570 (2016)
Thermodynamic Modeling of Oxide Phases in the Fe-Mn-O System, JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS, , 98, 237-246 (2016)
Aluminum Deoxidation Equilibria in Liquid Iron: Part III. Experiments and Thermodynamic Modeling of the Fe-Mn-Al-O system, METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, , 47B, 2837-2847 (2016)
Calculation of Property Diagram as a Zero-Phase Fraction Line of Auxiliary Phase, CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY, , 55, 69-75 (2016)
Regarding "Sulfide Capacity in Ladle Slag at Steelmaking Temperatures," C. Allertz, Du Sichen; MMTB 2015 December, CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY, , 47B, 3241-3243 (2016)
A reaction model to simulate composition change of mold flux during continuous casting of high Al steel, Advances in Molten Slags, Fluxes, and Salts: Proceedings of the 10th International Conference on Molten Slags, Fluxes and Salts 2016, , , 271-277 (2016)
FactSage thermochemical software and databases, 2010-2016 (vol 54, pg 35, 2016), CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY, , 55, 1-19 (2016)
Compositional Evolution of Oxide Inclusions in Austenitic Stainless Steel during Continuous Casting, STEEL RESEARCH INTERNATIONAL, , 86, 284-292 (2015)
Evaporation Mechanism of Sn and SnS from Liquid Fe: Part III. Effect of C on Sn Removal, METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, , 46, 267-277 (2015)
Evaporation Mechanism of Sn and SnS from Liquid Fe: Part II: Residual Site and Evaporation Kinetics via Sn(g) and SnS(g), METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, , 46, 259-266 (2015)
Thermodynamic Modeling of the Fe-Mn-C and the Fe-Mn-Al Systems Using the Modified Quasichemical Model for Liquid Phase, JOURNAL OF PHASE EQUILIBRIA AND DIFFUSION, , 36, 453-470 (2015)
Aluminum Deoxidation Equilibria in Liquid Iron: Part II. Thermodynamic Modeling, METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, , 46, 2224-2233 (2015)
Desulfurization of Liquid Steel by Passing Steel Droplets through a Slag Layer, ISIJ INTERNATIONAL, , 55, 1581-1590 (2015)
Aluminum Deoxidation Equilibria in Liquid Iron: Part I. Experimental, METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, , 46, 1826-1836 (2015)
Calculation of surface tension using CALPHAD software as a Zero Phase Fraction line of ""surface"" phase, CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY, , 50, 105-112 (2015)
Relationship between surface tension and Gibbs energy, and application of Constrained Gibbs Energy Minimization, CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY, , 50, 23-31 (2015)
Modeling Surface Tension of Multicomponent Liquid Steel Using Modified Quasichemical Model and Constrained Gibbs Energy Minimization, METALS AND MATERIALS INTERNATIONAL, , 21, 765-774 (2015)
Development of Thermodynamic Database for High Mn-High Al Steels: Phase Equilibria in the Fe-Mn-Al-C System by Experiment and Thermodynamic Modeling, CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY, , 51, 89-103 (2015)
Reassessment of TiN(s) = Ti plus N Equilibration in Liquid Iron, INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, , 55, 2318-2324 (2015)
Evaporation Mechanism of Sn and SnS from liquid Fe - Part I: Experiment and Adsorption of S on Reaction Site, METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, , 46, 250-258 (2015)
Critical Evaluation and Thermodynamic Optimization of Fe-Cu, Cu-C, Fe-C Binary Systems and Fe-Cu-C Ternary System, CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY, , 45, 127-137 (2014)
In-situ observation of the dissolution of SiO2 particles in CaO-Al2O3-SiO2 slags and mathematical analysis of its dissolution pattern, JOURNAL OF THE AMERICAN CERAMIC SOCIETY, , 97, 316-325 (2014)
Determination of Gibbs Free Energy of Formation of MnV2O4 Solid Solution at 1823 K (1550 A degrees C), METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, , 45B, 131-141 (2014)
Phase equilibria and thermodynamics of the Fe-Al-C system: Critical evaluation, experiment and thermodynamic optimization, ACTA MATERIALIA, , 79, 1-15 (2014)
Thermodynamic modeling and diffusion kinetic experiments of binary Mg-Gd and Mg-Y systems, ACTA MATERIALIA, , 71, 164-175 (2014)
Microstructural evolution of a focused ion beam fabricated Mg nanopillar at high temperatures: Defect annihilation and sublimation, SCRIPTA MATERIALIA, , 86, 44-47 (2014)
Decarburization of Molten Fe-C Droplet: Numerical Simulation and Experimental Validation, ISIJ INTERNATIONAL, , 54, 2559-2568 (2014)
Critical Evaluation and Thermodynamic Optimization of Mg-Ga System and Effect of Low Piressure on Phase Equilibria, CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY, , 46, 168-175 (2014)
Effects of MnO on Crystallization, Melting, and Heat Transfer of CaO-Al2O3-Based Mold Flux Used for High Al-TRIP Steel Casting, METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, , 45, 1510-1519 (2014)
Selective oxidation of Al-rich, Fe-Mn-Al-C low density steels, Materials Science and Technology, , 30, 1805-1814 (2014)
Phase Equilibria and Thermodynamics of Mn-C, Mn-Si, Si-C Binary Systems and Mn-Si-C Ternary System by Critical Evaluation, Combined with Experiment and Thermodynamic Modeling, CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY, , 46, 92-102 (2014)
Experimental Investigation of Phase Equilibria and Thermodynamic Modeling of the CaO--Al2O3--CaS and the CaO--SiO2--CaS Oxysulfide Systems, ACTA MATERIALIA, , 61, 683-696 (2013)
The Shape of Liquid Miscibility Gaps and Short Range Order, JOURNAL OF CHEMICAL THERMODYNAMICS, , 60, 19-24 (2013)
A Reaction Mechanism between High Mn -- High Al Steel and CaO--SiO2 Type Molten Mold Flux: Part I. Composition Evolution in Molten Mold Flux, METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, , 44, 299-308 (2013)
A Reaction Mechanism between High Mn -- High Al Steel and CaO--SiO2 Type Molten Mold Flux: Part II. Reaction Mechanism, Interface Morphology, and Al2O3 Accumulation in Molten Mold Flux, METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, , 44, 309-316 (2013)
Transmission electron microscopy and thermodynamic studies of CaO-added AZ31 Mg alloys, ACTA MATERIALIA, , 61, 3267-3277 (2013)
Thermodynamics of the MnO-FeO-MnS-FeS-SiO2 System at SiO2 Saturation under Reducing Condition: Immiscibility in the Liquid Phase, ISIJ INTERNATIONAL, , 53, 751-760 (2013)
Microstructural Modeling of Mg Alloys and Experimental Validation, Materials Science Forum, , 765, 185-189 (2013)
Thermodynamic Assessment of MnO and FeO Activities in FeO-MnO-MgO-P2O5-SiO2(-CaO) Molten Slag, ISIJ INTERNATIONAL, , 53, 1325-1333 (2013)
Feasibility of BF Hearth Protection Using Spinel Formation by Slag Composition Control, ISIJ INTERNATIONAL, , 53, 1779-1785 (2013)
Activity Measurement of the CaS-MnS Sulfide Solid Solution and Thermodynamic Modeling of the CaO-MnO-Al2O3-CaS-MnS-Al2S3 System, ISIJ INTERNATIONAL, , 53, 2132-2141 (2013)
Erratum to“Thermodynamic Evaluation and Optimization of Al–La, Al–Ce, Al–Pr, Al–Nd and Al–Sm Systems Using a Modified Quasichemical Model for the Liquid”, CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY, , 38, 194-194 (2012)
Thermodynamic behavior of Si in Mn–Si melts, Kor. J. Met. Metall., , 50, 116-121 (2012)
Phase Equilibria in the Mn–V–O System near MnO–V2O3 Isopleth, JOURNAL OF THE AMERICAN CERAMIC SOCIETY, , 95, 2059-2064 (2012)
Critical Evaluation and Thermodynamic Optimization of the VO–VO2:5 System, JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, , 32, 3187-3198 (2012)
Thermodynamic Evaluation and Optimization of Binary Mg–Light Rare Earth (La, Ce, Pr, Nd, Sm) Systems, CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY, , 38, 100-116 (2012)
Influence of Partial Pressure of Sulfur and Oxygen on Distribution of Fe and Mn between Liquid Fe-Mn Oxysulfide and Molten Slag, METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, , 43, 1069-1077 (2012)
Valorisation of Steelmaking Slag by Microwave Treatment, IRONMAKING AND STEELMAKING, , 39, 498-503 (2012)
The Numerical Analysis of Surface Tension Gradient Effect on the Behavior of Gas Bubbles at the Solid/Liquid Interface of Steel, ISIJ INTERNATIONAL, , 52, 1730-1739 (2012)
The Role of Iron Oxide Bearing Molten Slag in Iron Melting Process for the Direct Contact Carburization, ISIJ INTERNATIONAL, , 51, 166-168 (2011)
Thermodynamic evaluation and optimization of Al-La, Al-Ce, Al-Pr, Al-Nd and Al-Sm systems using the Modified Quasichemical Model for liquids, CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY, , 35, 30-41 (2011)
Thermodynamics of MnO-SiO2-Al2O3-MnS Liquid Oxysulfide: Experimental and Thermodynamic Modeling, METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, , 42, 535-545 (2011)
Comment on "Thermodynamic modelling of an Al(2)O(3)-MnO system using the ionic model" by AB Farina and FB Neto, CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY, , 35, 255-257 (2011)
Sulfide Capacity of the CaO-SiO2-MnO Slag at 1 873 K, ISIJ INTERNATIONAL, , 51, 1375-1382 (2011)
On the Dissolution Behavior of Sulfur in Ternary Silicate Slags, METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, , 42, 1211-1217 (2011)
Erratum to: On the Dissolution Behavior of Sulfur in Ternary Silicate Slags, METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, , 42, 1383-1383 (2011)
The Role of Iron Oxide Bearing Molten Slag in Iron Melting Process for the Direct Contact Carburization, ISIJ INTERNATIONAL, , 51, 166-168 (2011)
Thermodynamic Analysis of Mn-depleted Zone Near Ti Oxide Inclusions for Intragranular Nucleation of Ferrite in Steel, ISIJ INTERNATIONAL, , 50, 501-508 (2010)
Critical evaluations and thermodynamic optimizations of the Mn-S and the Fe-Mn-S systems, CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY, , 34, 232-244 (2010)
Modeling short-range ordering in liquids: The Mg-Al-Sn system, CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY, , 34, 180-188 (2010)
Comment on "Thermodynamic description of the Hg-Te system" [Journal of Alloys and Compounds 494 (1-2) (2010) 102-108], JOURNAL OF ALLOYS AND COMPOUNDS, , 505, 483-485 (2010)
In situ observation of the dissolution phenomena of SiC particle in CaO-SiO2-MnO slag, JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, , 30, 3181-3186 (2010)
Thermodynamic Evaluation and Optimization of Al–Gd, Al–Tb, Al–Dy, Al–Ho and Al–Er Systems Using a Modified Quasichemical Model for the Liquid, CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY, , 34, 456-466 (2010)
Thermodynamic Database Development for Mg Alloys with RE Elements and Applications to Mg Alloy Design, Magnesium Technology, , , 359-364 (2010)
Thermodynamic assessment of the Ce-Si, Y-Si, Mg-Ce-Si and Mg-Y-Si systems, INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, , 100, 208-217 (2009)
FactSage thermochemical software and databases - recent developments, CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY, , 33, 295-311 (2009)
Thermodynamic and volumetric databases and software for magnesium alloys, JOM, , 61, 75-82 (2009)
Experimental Investigations of Phase Equilibria of MnS Containing Sub-systems in the MnO-SiO2-Al2O3-MnS System, ISIJ INTERNATIONAL, , 49, 1490-1497 (2009)
Thermodynamic Database for the Al-Ca-Co-Cr-Fe-Mg-Mn-Ni-Si-O-P-S System and Applications in Ferrous Process Metallurgy, JOURNAL OF PHASE EQUILIBRIA AND DIFFUSION, , 30, 443-461 (2009)
Thermodynamic Model and Database for Sulfides Dissolved in Molten Oxide Slags, METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, , 40, 979-994 (2009)
Critical evaluation and thermodynamic optimization of the Al-Ce, Al-Y, Al-Sc and Mg-Sc binary systems, CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY, , 32, 413-422 (2008)
Thermodynamic assessment of the Ca-Zn, Sr-Zn, Y-Zn and Ce-Zn systems, CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY, , 32, 423-431 (2008)
Thermodynamic assessment of the Si-Zn, Mn-Si, Mg-Si-Zn and Mg-Mn-Si systems, CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY, , 32, 470-477 (2008)
Critical evaluation and thermodynamic optimization of the binary systems in the Mg-Ce-Mn-Y system, JOURNAL OF PHASE EQUILIBRIA AND DIFFUSION, , 28, 342-354 (2007)
Thermodynamic database development of the Mg-Ce-Mn-Y system for Mg alloy design, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 38A, 1231-1243 (2007)
Modeling short-range ordering in solutions, INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, , 98, 907-917 (2007)
Effect of Ferrosilicon Addition on the Composition of Inclusions in 16Cr-14Ni-Si Stainless Steel Melts, METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, , 37, 791-797 (2006)
Critical Thermodynamic Evaluation and Optimization of the MnO–“TiO2”–“Ti2O3” System, CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY, , 30, 235-247 (2006)
Critical Thermodynamic Evaluation and Optimization of the MnO–SiO2-“TiO2”–“Ti2O3” System, CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY, , 30, 226-234 (2006)
Experimental Study of Phase Equilibria in the MnO–SiO2–“TiO2”–“Ti2O3”system, ISIJ INTERNATIONAL, , 45, 1552-1560 (2005)
Experimental Study of Phase Equilibria in the MnO–“TiO2”–“Ti2O3”system, ISIJ INTERNATIONAL, , 45, 1543-1551 (2005)
Dissolution Behavior of Alumina in Mold Fluxes for Steel Continuous Casting, METALS AND MATERIALS INTERNATIONAL, , 11, 183-190 (2005)
Practical Application of Thermodynamics to Inclusions Engineering in Steel, JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS, , 66, 219-225 (2005)
Experimental and Thermodynamic Modeling of the MnO–SiO2–TiO2–Ti2O3 System, MATERIALS SCIENCE FORUM, , 475-4, 293-296 (2005)
Inclusions Chemistry for Mn/Si Deoxidized Steels: Thermodynamic Predictionsand Experimental Confirmations, ISIJ INTERNATIONAL, , 44, 1006-1015 (2004)
Phase Equilibria and Thermodynamic Properties of the CaO–MnO–Al2O3–SiO2 System by Critical Evaluation, Modeling and Experiment, ISIJ INTERNATIONAL, , 44, 975-983 (2004)
Critical Thermodynamic Evaluation and Optimization of the CaO–MnO–SiO2 and CaO–MnO–Al2O3 Systems, ISIJ INTERNATIONAL, , 44, 965-974 (2004)
Thermodynamic Evaluation and Optimization of the MnO–Al2O3 and MnO–Al2O3–SiO2 Systems and Applications to Inclusion Engineering, METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, , 35, 259-268 (2004)
Thermodynamic Evaluation and Modeling of the Fe–Co–O System, ACTA MATERIALIA, , 52, 507-519 (2004)
Thermodynamic Study of MnO–SiO2–Al2O3 System : Liquidus Lines and Activities of MnO at 1823K, METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, , 33, 915-920 (2002)

국내전문학술지

Thermodynamic Study for P Reduction from Slag to Molten Steel by using the Microwave Heating, KOREAN JOURNAL OF MATERIALS RESEARCH, , 20, 42-46 (2010)

일반학술지

Interfacial Reaction Between Ultra Low C Steel and Gas Generated from Refractory Material Used for Submerged Entry Nozzle for Continuous Casting, BHM Berg- und Hu ̈ttenm ̈annische Monatshefte, , 163, 18-22 (2018)
Thermodynamic Modeling of Oxide Phases in the Mn-O System, METALLURGICAL AND MATERIALS TRANSACTIONS E-MATERIALS FOR ENERGY SYSTEMS, , 3, 156-170 (2016)
A Thermodynamic Model and Database for Oxysulfide Inclusions Containing Ca-Mn-Si-Al-O-S and Its Application to Prediction of Inclusions Evolution in Steels, AIST Transactions, , 11, 218-228 (2014)
Thermodynamics of Inclusions Engineering in Steelmaking and Refining, Iron and Steel Technology, , 2, 153-162 (2006)

학술회의논문

Attempts to Develop Enhanced Refining Technology in Steelmaking Process - Applications of Drop Formation and Electricity to Desulfurization, Proc. of SMCSTP 2020, 0, 0, - (2020)
Growth Mechanism of Clog Materials in SEN during Continuous Casting of Ti added ULC Steel, Proc. of AISTech 2019, 0, 0, - (2019)
Interfacial Reaction between High Al Steel and CaO-SiO2 based Mold Flux during Continuous Casting, Prof. of CSST 2018, 0, 0, - (2018)
THERMODYNAMIC MODELING OF FE-C-S TERNARY SYSTEM, Prof. of TOFA 2018, 0, 0, - (2018)
EVAPORATION OF S FROM LIQUID FE- C-S ALLOY, Proc. of TOFA 2018, 0, 0, - (2018)
PREDICTION/VALIDATION OF OXIDATION OF FE-AL-TI ALLOY AND ITS IMPORTANCE OF NOZZLE CLOGGING , Proc. of TOFA 2018, 0, 0, - (2018)
Innovative Applications of Bubbles and Drops to Ferrous Process Technology, Prof. of Extraction 2018, 0, 0, - (2018)
On the Evaporation of S from Liquid Fe–C–S Alloy, Proc. of Extraction 2018, 0, 0, - (2018)
Consideration of phase equilibria in Fe-Al-Ti-O system and its importance in steel cleanliness during casting process, Proc. of ICS 2018, 0, 0, - (2018)
Inclusion thermodynamics for high-Mn high-Al advanced high strength steels, Proc. of ICS 2018, 0, 0, - (2018)
Influence of Al/Ti ratio on nozzle clogging for continuous casting of Ti-bearing Al-killed ultra low carbon steel, Proc. of ICS 2018, 0, 0, - (2018)
Investigation on sulfur transfer reaction under electric field between molten iron and molten slag, Proc. of ICS 2018, 0, 0, - (2018)
Evaporation of Tramp Elements in Liquid Steel for Ferrous Scrap Recycling, Prof. of MMMS 2018, 0, 0, - (2018)
EFFECT OF TI ADDITION ON CHEMICAL REACTION BETWEEN ULTRA LOW C STEEL AND REFRACTORY MATERIAL USED FOR SUBMERGED ENTRY NOZZLE FOR CONTINUOUS CASTING, Proc. of 60th International Colloquium on Refractories, 0, 0, - (2017)
Evaporation of Cu and Sn in Ferrous Scrap Mixed with Hote Metal, Proc. of Liquid Metal Processing and Casting Conference, 0, 0, - (2017)
Investigation on interfacial reaction between Ti-bearing ultra low carbon steel and inner wall of submerged entry nozzle for continuous casting, Current Advances in Materials Processing, 0, 0, - (2017)
Understanding electrochemical reaction of S transfer between liquid iron and CaO-SiO2-Al2O3-MgO slag, Current Advances in Materials Processing, 0, 0, - (2017)
A Reaction Mechanism and Model for the Composition Change of Mold Flux during Continuous Casting of High Al Steel, Proc. of European Continuous Casting Conference, 0, 0, - (2017)
Interfacial Reaction between Ultra Low C Steel and Refractory Material Used for Submerged Entry Nozzle for Continuous Casting, Proc. of European Continuous Casting Conference, 0, 0, - (2017)
Investigation on the Interfacial Tension between Mold Slag and the Initial Solidification Shell Affecting Sliver Defects, Proc. of European Continuous Casting Conference, 0, 0, - (2017)
Calculation of Surface Tension of Liquid Alloys Using Thermodynamic Software for Phase Diagram Calculation, Cuurent Advances in Materials and Processes, 0, 0, - (2017)
A Reaction Model to Simulate Composition Change of Mold Flux during Continuous Casting of High Al Steel, PROC. OF 10TH INT. SYMPOSIUM ON MOLTEN SLAG, FLUXES, AND SALTS,, 0, 0, - (2016)
Activity Coefficient of Strongly Interacting Solutes in Liquid Steel, CAMP-ISIJ, 0, 0, - (2016)
Modeling Short-Range Ordering in Liquid Steel including Deoxidation Equilibria, PROC. OF 8TH HIGH TEMPERATURE PROCESSING SYMPOSIUM, 0, 0, 34-36 (2016)
A Reaction Mechanism between Al-containing Steel and CaO-SiO2-type Molten Mold Fluxes, PROC. OF ASIA STEEL 2015, 0, 0, - (2015)
Thermodynamics of Nitrides and Oxides Formation in High Alloy Steel Melts, PROC. OF ASIA STEEL 2015, 0, 0, - (2015)
Al Deoxidation Equilibria in High-Mn and High-Al Alloyed Liquid Steels, PROC. OF ASIA STEEL 2015, 0, 0, - (2015)
Desulfurization of Molten Steel by Passing the Steel Droplets through a Slag Layer, PROC. OF ASIA STEEL 2015, 0, 0, - (2015)
Reaction mechanism and rate of Sn evaporation from liquid steel, PROC. OF 7TH KOREA-CHINA JOINT SYMPOSIUM ON ADVANCED STEEL TECHNOLOGY, 0, 0, - (2015)
Thermodynamics of Inclusion Formation in High Alloy Steel Metls, PROC. OF 7TH KOREA-CHINA JOINT SYMPOSIUM ON ADVANCED STEEL TECHNOLOGY, 0, 0, - (2015)
X-Ray Fluoroscopy Observation of Bubble for Its Formation and Motion in Liquid Steel, PROC. OF 5TH ICS 2015, 0, 0, - (2015)
Modeling Short-Range Ordering in Liquid Steel, PROC. OF 5TH ICS 2015, 0, 0, - (2015)
Evaporation Reaction of Sn in S containing Liquid Steel",, PROC. OF 7TH HIGH TEMPERATURE PROCESSING SYMPOSIUM, 0, 0, - (2015)
Thermodynamic Optimzation of Mn-Si-C System, PROF. OF TMS 2014, 0, 0, - (2014)
Cu Evaporation Kinetics in Liquid Steel, PROC.OF 6TH HIGH TEMPERATURE PROCESSING SYMPOSIUM, 0, 0, - (2014)
Thermodynamic Database Development for Magnesium Alloys with RE-Element Additions, PROF. OF MATERIALS SCIENCE & TECHNOLOGY 2013, 0, 0, - (2013)
Recent Advances in Thermodynamic Modeling/database for Ferrous Metallurgy, PROC. OF 3RD INDONESIAN IRON AND STEEL CONFERENCE, 0, 0, - (2013)
Technology in Ironmaking and Steelmaking, PROC. OF 9TH KOREA-JAPAN WORKSHOP ON SCIENCE AND TECHNOLOGY IN IRONMAKING AND STEELMAKING, 0, 0, - (2013)
Some Considerations of Copper Removal from Steel Ferrous Scrap, PROF. OF THE 5TH BAOSTEEL BIENNIAL ACADEMIC CONFERENCE,, 0, 0, - (2013)
A thermodynamic model and database for oxysulfide inclusions containing Ca-Mn-Si-Al-O-S, PROC. AISTECH 2013, 0, 0, - (2013)
Microstructural Evolution of CaO-added AZ31 Mg Alloys, PROC. OF MAGNESIUM TECHNOLOGY 2013, 0, 0, - (2013)
Coupled Experimental and Thermodynamic Modelling for Metallurgical Slags and Inclusions Containing Sulphur, PROC. OF 5TH HIGH TEMPERATURE PROCESSING SYMPOSIUM, 0, 0, - (2013)
Phase Equilibria and Thermodynamics of the CaO–Al2O3–CaS and the CaO–SiO2–CaS Oxysulfide Systems, CAMP-ISIJ, 0, 0, - (2012)
“A Reaction Mechanism between High Mn-High Al Steel and Molten Mould Fluxes, PROC. OF INTERNATIONAL CONGRESS ON THE SCIENCE AND TECHNOLOGY OF STEELMAKING, 0, 0, - (2012)
Copper Distribution between gamma-Fe and Liquid Sulfide, PROF. OF ASIA STEEL CONFERENCE, 0, 0, - (2012)
Thermodynamic Modeling and Database Development for Mg Alloys, PROC. OF INTERNATIONAL CONFERENCE ON MAGNESIUM ALLOYS AND THEIR APPLICATIONS, 0, 0, - (2012)
Modeling of Thermodynamic Properties and Phase Equilibria in Mg–RE and Mg–Al–RE (RE=Rare Earth) Systems, PROF. OF INTERNATIONAL CONFERENCE ON MAGNESIUM ALLOYS AND THEIR APPLICATIONS, 0, 0, - (2012)
Inclusion Thermodynamics for High-Al High-Mn Advanced High Strength Steels, PROC. OF CLEAN STEEL IN THE FUTURE, 0, 0, - (2012)
Thermodynamic Investigation on the Mn–V–O Oxide System and Gibbs Energy of Formation of MnV2O4 Spinel Solid Solution, PROC. OF INTERNATIONAL CONFERENCE ON MOLTEN SLAGS, FLUXES AND SALTS, 0, 0, - (2012)
Experimental Investigation of Phase Equilibria and Thermodynamic Modeling of the CaO–SiO2–Al2O3–CaS Oxysulfide System, PROC. OF INTERNATIONAL CONFERENCE ON MOLTEN SLAGS, FLUXES AND SALTS, 0, 0, - (2012)
Some Considerations of Copper Removal from Steel by Use of Oxysulfide Systems, PROF. OF INTERNATIONAL CONFERENCE ON MOLTEN SLAGS, FLUXES AND SALTS, 0, 0, - (2012)
Compositional Change of Inclusions of Austenitic Stainless Steel during Continuous Castimg, PROC. OF CLEAN STEEL IN THE FUTURE, 0, 0, - (2012)
Solidification Studies of Mg–Al Binary Alloys, MAGNESIUM TECHNOLOGY 2012, 0, 0, - (2012)
Dissolution Behavior of Sulfur in Ternary Silicate Slags, CAMP-ISIJ, 0, 0, - (2011)
Experimental Investigation on the Phase Equilibria in the Mn-V-O System, CAMP-ISIJ, 0, 0, - (2011)
Phase Equilibria of the MnO-SiO2-Al2O3-MnS System, PROCEEDINGS OF 7TH KOREA-JAPAN WORKSHOP ON SCIENCE AND TECHNOLOGY IN IRONMAKING AND STEELMAKING, 0, 0, - (2011)
Experimental and Thermodynamic Investigations on MnO-SiO2-Al2O3-MnS, PROC. OF THE 4TH BAOSTEEL BIENNIAL ACADEMIC CONFERENCE, 0, 0, - (2010)
Experimental and Thermodynamic Investigations on MnO-SiO2-Al2O3-MnS liquid oxysulfide at 1500◦C, CAMP-ISIJ, 0, 0, - (2010)
Applications of Thermodynamics to Inclusions Engineering in Steel, PROC. OF SEETHARAMAN SEMINAR, 0, 0, - (2010)
Thermodynamic Database Development for Mg Alloys with RE Elements and Applications to Mg Alloy Design, MAGNESIUM TECHNOLOGY 2010, 0, 0, 359-367 (2010)
Thermodynamic modeling of sulfur dissolved in molten oxide slags, 6TH KOREA-JAPAN WORKSHOP ON SCIENCE AND TECHNOLOGY IN IRONMAKING AND STEELMAKING, 0, 0, 94-101 (2010)
Applications of Thermodynamic Databases to Inclusions Engineering, PROC. OF 6TH KOREA-JAPAN WORKSHOP ON SCIENCE AND TECHNOLOGY, 0, 0, - (2010)
Applications of Thermodynamic Databases to Inclusions Engineering, ATIS 2009, 0, 0, 28-34 (2009)
Applications of Thermodynamic Databases to Inclusions Engineering, KOREA-CHINA JOINT SYMPOSIUM, 0, 0, - (2009)
Thermodynamic Databases and Their Applications for Sulfur Control in Steelmaking, ASIA STEEL 2009, 0, 0, S3-42- (2009)
Thermodynami Modeling of Pyrometallurgical Oxide Systems Containing Mn Oxides, MOLTEN SLAG 2009, 0, 0, 460-472 (2009)
Experimental Investigation of Phase Equilibria of Subsystems in the MnO-SiO2-Al2O3-MnS System, MOLTEN SLAG 2009, 0, 0, 143-148 (2009)
Thermodynamic Model and Database for Gaseous Species in Molten Slags, MOLTEN SLAG 2009, 0, 0, 143-148 (2009)
Multicomponent Phase Diagram Calculations and Optimized Thermodynamic Databases, THERMANS 2008, 0, 0, 62-67 (2008)
Thermodynamics of MnO–SiO2–“TiO2”–“Ti2O3” System with Consideration of Inclusion Formation in Mn–Si–Ti Containing Steels, PROF. OF 2ND BAOSTEEL BIENNIAL ACADEMIC CONFERENCE, 0, 0, - (2006)
Thermodynamics of Inclusions Engineering in Steelmaking and Refining, PROC. OF 3RD INTERNATIONAL CONGRESS ON THE SCIENCE AND TECHNOLOGY OF STEELMAKING, 0, 0, - (2005)
Usefulness of Computational Thermodynamics in Control of Steel Chemistry, PROF. OF 2ND KOREA-JAPAN WORKSHOP ON SCIENCE AND TECHNOLOGY IN IRONMAKING AND STEELMAKING, 0, 0, - (2004)
Proper Use of Computational Thermodynamic Calculations in Material Science and Engineering, PROF. OF 6TH INTERNATIONAL CONFERENCE ON HIGH TECHNOLOGIES IN ADVANCED METAL SCIENCE AND ENGINEERING, 0, 0, - (2004)
Inclusion Control in Steels containing Si, Mn, Ti, Mg and/or Al: Thermodynamic Prediction and Experimental Confirmation, PROC OF 6TH INTERNATIONAL CONFERENCE ON HIGH TECHNOLOGIES IN ADVANCED METAL SCIENCE AND ENGINEERING, 0, 0, - (2004)
Inclusion Control Steels containing Si, Mn, Ti, Mg and/or Al: Thermodynamic Prediction and Experimental Confirmation, PROC. OF METAL SEPARATION TECHNOLOGIES III, 0, 0, - (2004)
Decomposition of Li2CO3 in existence of SiO2 in mould flux of steel casting, PROC. OF VII INT. CONF. ON MOLTEN SLAGS, FLUXES AND SALTS, 0, 0, - (2004)
Thermodynamic Modeling of the Al2O3–CaO–CoO–CrO– Cr2O3–FeO–Fe2O3–MgO–MnO–NiO–SiO2–S System and Applications in Ferrous Process Metallurgy, PROC. OF VII INT. CONF. ON MOLTEN SLAGS, FLUXES AND SALTS, 0, 0, - (2004)
Practical Application of Computational Thermodynamics to Control of Inclusion Compositions in Steelmaking Process, PROC. OF ASIA STEEL INTERNATIONAL CONFERENCE, 0, 0, - (2003)
Thermodynamic Modelling of the system CaO–MnO –Al2O3–SiO2 to predict the inclusion behavior in Mn-Si deoxidized steel, CAMP-ISIJ, 0, 0, - (2002)
Critical Evaluation and Optimization of CaO–MnO–Al2O3–SiO2 System and Its Application to Inclusion Controls, PROCEEDINGS OF THE INTERNATIONAL SYMPOSIUM ON LADLE AND TUNDISH METALLURGY, 0, 0, - (2002)

학회발표

대한금속재료학회, 초록집, 0, 0, - (2019)
Development of a New Technique for Simultaneous Determination of Soluble Oxygen and Insoluble Oxygen in Al-killed Steel Using the Inert Gas Fusion Infrared Absorption Method, 초록집, 0, 0, - (2019)
Dissolution of Alumina Inclusion in RH Slag Containing FetO, Proc. of 11th China-Korea Joint Symposium on Advanced Steel Technology, 0, 0, - (2019)
A Study on the Correlation between Electrical Energy and Desulfurization of Molten Steel by Molten Slag, 초록집, 0, 0, - (2019)
Dissolution Behavior of Al2O3 into CaO-Al2O3-FetO-MgO-SiO2 Slag System and Its Kinetic Analsysis, 초록집, 0, 0, - (2019)
Thermodynamic Modeling of Fe-Mn-Si-C system, ..., 0, 0, - (2019)
Understanding Correlation between Current and Desulfurization during Electric Desulfurization of Molten Steel with Molten Slag, 초록집, 0, 0, - (2019)
Reduction of Interfacial Reaction Product between Ti-ULC Steel and Nozzle Refractory by Al and Ti in the Steel , 초록집, 0, 0, - (2019)
Influence of Ar Gas with Trace Oxygen on Surface Oxidation for Ti-ULC Steel Casting, 초록집, 0, 0, - (2019)
Nozzle Clogging Mechanism in terms of Interfacial Reaction between Ti-ULC Steel and Refractory in Continuous Casting, 초록집, 0, 0, - (2019)
Dissolution rate of alumina into molten slags containing FetO and its kinetic modeling, 2018년 대한금속재료학회 추계대회 초록집, 0, 0, - (2018)
The dissolution behavior of lime in CaO-Al2O3-SiO2 slag, 2018년 대한금속재료학회 추계대회 초록집, 0, 0, - (2018)
Kinetic Analysis of Oxidation Rate by Interfacial Reaction between Molten Steel and CO Gas Generated from Nozzle Material in Continuous Casting , 2018년 대한금속재료학회 추계대회 초록집, 0, 0, - (2018)
Investigation on the Formation Behavior of Inclusions in Si-killed Steel, 2018년 대한금속재료학회 추계대회 초록집, 0, 0, - (2018)
The interfacial reaction between ULC Al-killed steel and Fet¬O-CaO-Al2O3-MgO slag system in secondary refining process, 2018년 대한금속재료학회 추계대회 초록집, 0, 0, - (2018)
Dissolution of Ceramic Particle into Molten Slags – Design of Experiment and Interpretation of Result, Proc. of MS&T2018, 0, 0, - (2018)
Dissolution Rate of Alumina in CaO-Al2O3-FetO-MgO-SiO2 Slag System, 2018년 대한금속재료학회 춘계대회, 0, 0, - (2018)
Behavior of Frozen Steel Deposition on Submerged Entry Nozzle in Continuous Casting of Ti-ULC steels , 2018년 대한금속재료학회 춘계대회 초록집, 0, 0, - (2018)
Kinetic analysis of reoxidation behavior for Al-killed steel by slag containing FetO, 2018년 대한금속재료학회 춘계 대회 초록집, 0, 0, - (2018)
Nozzle clogging during continuous casting of Ti added ultra low carbon steel – interfacial reaction point of view, Proc. of Asia Steel 018, 0, 0, - (2018)
Investigation on S Transfer between Liquid Iron and CaO-SiO2-Al2O3-MgO Slag under Electricity , 논문집 없음, 0, 0, - (2017)
Effect of additional Al on Nozzle Clogging for Ti-bearing Al-killed Ultra Low Carbon Steel in Continuous Casting, 논문집 없음, 0, 0, - (2017)
Reaction between High Al Steel and Mold Flux during Continuous Casting: Experiment and Kinetic Simulation using Thermodynamic Database, 논문집 없음, 0, 0, - (2017)
Effect of Carbon Contents in Liquid Steel on Interfacial Reaction Between Ti-bearing Al-killed Steel and CO gas Generated from Nozzle Material for Continuous Casting, 논문집없음, 0, 0, - (2017)
Understanding Electrochemical Reaction of S Transfer between Liquid Iron and CaO-SiO2-Al2O3-MgO Slag, 논문집 없음, 0, 0, - (2017)
Dissolution Behavior of Alumina in CaO-Al2O3-FetO Slag System, 논문집 없음, 0, 0, - (2017)
Desulfurization of High C Liquid Iron by CaO-SiO2-Al2O3-MgO Slag under Electric Current, 논문집 없음, 0, 0, - (2017)
Interfacial Reaction between Ultra Low Carbon Steel and CO Gas Generated from Submerged Entry Nozzle , 논문집 없음, 0, 0, - (2017)
Chromium Distribution Behavior in Molten Pig Iron , 논문집 없음, 0, 0, - (2017)
Kinetic Evaporation of Tramp Element at C-sat Condition, ., 0, 0, - (2016)
Thermodynamics Optimization of Fe{C{S System, ., 0, 0, - (2016)
In-Situ X-Ray Fluoroscopic Observation for Motion of Bubbles in Liquid Fe-C and Fe-C-S for Correction of Drag Coecient Used in Numerical Simulation, ., 0, 0, - (2016)
Clogging Behavior of Submerged Entry Nozzle for Ti-Bearing Al-killed Ultra Low Carbon Steel, ., 0, 0, - (2016)
Characteristic Study on Crystallization Behaviors of Extremely High Basicity Mold Fluxes, ., 0, 0, - (2016)
Kinetic Study of S Evaporation from Liquid Fe-C-S System, ., 0, 0, - (2016)
Clogging Behavior of Submerged Entry Nozzle for Ti-bearing Al-killed Ultra Low Carbon Steel with CaO-Containing Materials, ., 0, 0, - (2016)
Kinetic Study of Cu Evaporation in Liquid Fe-Cu-C-S System, ., 0, 0, - (2016)
Calculation of Surface Tension of Liquid Alloys Using Thermodynamic Software, ., 0, 0, - (2015)
Development of Multicomponent Kinetic Model for Al-containing Steel and CaO-SiO2-type Slags, ., 0, 0, - (2015)
X-Ray Fluoroscopic and Numerical Analysis of Bubble for Its Motion in Liquid Steel, ., 0, 0, - (2015)
Effect of Slag Composition on Dissolution Behavior of Cu in Molten Slag, ., 0, 0, - (2015)
Evaporation Mechanism of Cu and Sn from Liquid Fe-C-S alloy, ., 0, 0, - (2015)
A Reaction Mechanism between High Al Steel and CaO-SiO2-type Molten Mold Fluxes, ., 0, 0, - (2015)
A Reaction Mechanism between High Al Steel and CaO-SiO2-type Molten Mold Fluxes, ., 0, 0, - (2015)
X-Ray Fluoroscopy Observation of Bubble Formation and Its Motion in Liquid Steel, ., 0, 0, - (2015)
Copper Removal in Molten Iron by S-containing Molten Salt Flux, ., 0, 0, - (2015)
Mn-depleted zone near Ti oxide inclusions: thermodynamic modeling and application for intragranular nucleation of ferrite in steel, ., 0, 0, - (2014)
X-Ray Fluoroscopy Observation of Bubble Formation and Its Motion in Liquid Steel, ., 0, 0, - (2014)
Evaporation of Sn from liquid Fe containing C and S, ., 0, 0, - (2014)
Desulfurization of Molten Steel by Passing Steel Droplet Through Slag Layer, ., 0, 0, - (2014)
Critical evaluation and thermodynamic optimization of Fe-Cu, Cu-C, Fe-C binary systems and FeCuC ternary system, ., 0, 0, - (2014)
Modelling Short-Range Ordering in Liquid Steel, ., 0, 0, - (2014)
Removal of copper in iron melts by sulfur containing molten salt, ., 0, 0, - (2014)
Experiment and thermodynamic modeling of CaO-(Al2O3,SiO2)-CaS oxysul랴de system and nozzle clogging prevention in Al-killed steel, ., 0, 0, - (2014)
Investigation on Developing Nickel Rich Layer on Continuous Casting Slab by Ni-Containing Mold Flux, ., 0, 0, - (2014)
Investigation of Developing Nickel Rich Layer on Steel Surface for Preventing Surface Hot Shortness, ., 0, 0, - (2014)
Cu evaporation kinetics in liquid steel, ., 0, 0, - (2014)
Formation of liquid steel drops by impact pad, ., 0, 0, - (2014)
Thermodynamic modeling of the Fe-Mn-Al-C system coupled with key experiments, ., 0, 0, - (2014)
Influence of Surfactant on Bubble Motion in Liquid Steel, ., 0, 0, - (2014)
Desulfurization of Molten Steel by Passing Steel Droplet through Slag Layer, ., 0, 0, - (2014)
A Thermodynamic Model and Database Development of Molten Oxysulfide Solution, ., 0, 0, - (2014)
Phase Equilibria in the Fe-Mn-Al-C system: Experiment and Thermodynamic Modeling, ., 0, 0, - (2014)
Aluminum deoxidation equilibrium in high Mn-Al containing liquid steels:Part 2. Fe-Mn-Al-O system, ., 0, 0, - (2014)
Aluminum deoxidation equilibrium in high Mn-Al containing liquid steels:Part 2. Fe-Mn-Al-O system, ., 0, 0, - (2014)
Evaporation Mechanism of Sn and SnS from Liquid Steel, ., 0, 0, - (2014)
Investigation of Developing Nickel Rich Layer on Steel Surface for Preventing Surface Hot Shortness, ., 0, 0, - (2014)
\Decarburization of Molten Fe-C Droplet: Numerical Simulation and Experimental Validation, ., 0, 0, - (2014)
Reaction mechanism and reaction rate of Sn evaporation from liquid steel, ., 0, 0, - (2014)
In-Situ CSLM Investigation on Dissolution of SiO2 Particles in CaO-Al2O3-SiO2 Slags, ., 0, 0, - (2014)
Desulfurization Reaction by CaO based Flux in Carbon Saturated Iron, ., 0, 0, - (2013)
Experimental Investigation and Thermodynamic Modeling in the Fe-Mn-Al-C system, ., 0, 0, - (2013)
Sn and SnS Evaporation in Liquid Steel, ., 0, 0, - (2013)
Experimental Determination of Phase Equilibria and Thermodynamic Modeling of the Fe-rich Corner in Fe-Al-C system, ., 0, 0, - (2013)
Calculation of Surface Tension Using Butler Equation and Modified Quasichemical Model for Fe-based Liquid Metal, ., 0, 0, - (2013)
A Study of Calcium Ferrite as an Alternative for Lime and Scrap Charging in New Steelmaking Process, ., 0, 0, - (2013)
An Investigation on Nitrogen Desorption from Molten Steel by Reaction with Methane (CH4) Gas", ., 0, 0, - (2013)
A Reaction Mechanism between High Mn { High Al Steel and Molten Mold Fluxes, ., 0, 0, - (2013)
A thermodynamic Model and Database for Oxysulde Inclusions Containing Ca-Mn-Si-Al-O-S, ., 0, 0, - (2013)
Thermodynamic Optimization of Mn-C, Mn-Si, Si-C and Mn-Si-C Systems, ., 0, 0, - (2013)
An Investigation on Nitrogen Desorption from Molten Steel by Reaction with Methane (CH4) Gas, ., 0, 0, - (2013)
Copper Distribution between gamma-Fe and Fe-Cu-O-S Liquid Oxysulfide, ., 0, 0, - (2013)
“Critical Evaluation and Thermodynamic Optimization of the Fe-Cu-C system, ., 0, 0, - (2013)
Introduction of CALPHAD thermodynamic software and database for calculations of thermophysical properties of multicomponent materials, ., 0, 0, - (2013)
A Reaction Mechanism between High Mn – High Al Steel and Molten Mold Fluxes, ., 0, 0, - (2012)
A Study of Calcium Ferrite as an Alternative for Lime and Scrap Charging in New Steelmaking Process, ., 0, 0, - (2012)
Thermodynamic Investigation on the Mn–V–O Oxide System and Gibbs Energy of Formation of MnV2O4 Spinel Solid Solution, ., 0, 0, - (2012)
Experimental Investigation of Phase Equilibria and Thermodynamic Modeling of the CaO–SiO2–Al2O3–CaS Oxysulfide System, ., 0, 0, - (2012)
Valorisation of BOF Steelmaking Slag by Microwave Treatment, ., 0, 0, - (2012)
Thermodynamic Assessment of Mn-Si System, ., 0, 0, - (2012)
Thermodynamic Investigation of the MnV2O4 Spinel Phase at 1550◦C, ., 0, 0, - (2011)
Copper Distribution between gamma-Fe and Fe-Cu-S liquid Sulfide at 1200°C, ., 0, 0, - (2011)
Dissolution Behavior of Sulfur in Ternary Silicate Slags, ., 0, 0, - (2011)
Mg Alloy Databases: Current State, New Developments, and Applications, ., 0, 0, - (2011)
Modeling of Thermodynamic Properties and Phase Equilibria in Mg-Al-Mischmetal Systems, ., 0, 0, - (2011)
Behavior of Oxysulfide Inclusions During Solidification of Mn/Si Deoxidized Steel with High S Concentration, ., 0, 0, - (2011)
Study on the dephosphorization of Mn-Fe-Si-C ferroalloy under reducing condition, ., 0, 0, - (2010)
Reduction Behavior of SiO2 in Mold Slag by Reaction with High Mn-Al Steel, ., 0, 0, - (2010)
Investigation on Calcium Ferrite Reduction by Dissolved Carbon in Pig Iron, ., 0, 0, - (2010)
Phase Equilibria in the MnO-VOx System, ., 0, 0, - (2010)
Thermodynamic Database and Their Applications for Sulfur Control in Steelmaking, ., 0, 0, - (2010)
Modeling Shrot-Range Ordering and Clustering in Liquid Solutions, ., 0, 0, - (2010)
Using CALPHAD Thermodynamic Data to Understand the Carbothermic Reduction of Steelmaking Slag by Microwave Heating, ., 0, 0, - (2010)
Modeling of thermodynamic properties and phase equilibria in Mg-Al-Mischmetal systems, ., 0, 0, - (2010)
A Thermodynamic Model and Database for Gaseous Species Dissolved in Molten Multicomponent Slags, ., 0, 0, - (2010)
Thermodynamic Database for the Al-Ca-Co-Cr-Fe-Mg-Mn-Ni-Si-O-S System and Applications in Ferrous Process Metallurgy, ., 0, 0, - (2008)
Thermodynamic Databases for Magnesium Alloy Design for Lightweight Automotive Applications, ., 0, 0, - (2008)
Modeling of Gas Solubilities in Oxide Melts, ., 0, 0, - (2007)
Thermodynamic Databases for Magnesium Alloy Design, ., 0, 0, - (2007)
Experimental and Thermodynamic Optimization of the MnO-SiO2-TiO2-Ti2O3 System for Application to Steel Production, ., 0, 0, - (2007)
Modeling Short-Range Ordering, ., 0, 0, - (2007)
Thermodynami Databases for Magnesium Alloy Design, ., 0, 0, - (2007)
Experimental and Thermodynamic Modeling of the MnO-SiO2-TiO2-Ti2O3 System, ., 0, 0, - (2004)
Phase Equilibria of the MnO-TiO2-Ti2O3-SiO2 System, ., 0, 0, - (2004)
Effect of Ca Addition into Ultra-Low Carbon Steel on Refractories and Inclusions, ., 0, 0, - (2004)
A Study on Dissolution of Alumina into Mold Fluxes, ., 0, 0, - (2004)
Dissolution Rate of Alumina in CaO-SiO2-Al2O3-(CaF2 or B2O3) Slags, ., 0, 0, - (2004)
Dissolution Rate of Alumina into Mold Fluxes, ., 0, 0, - (2004)
Phase Equilibria of the Mn-Ti-O System, ., 0, 0, - (2004)
Effect of Al Addition to Phase, Composition and Size distribution in Mn/Si/Ti/Mg Steel, ., 0, 0, - (2003)
Recent Developments in the FACT Oxide Database, ., 0, 0, - (2003)
Practical Application of Thermodynamics to Inclusions Engineering in Steel, ., 0, 0, - (2003)
Prediction of Inclusion Composition in Mn-Si Deoxidized Steel Using Thermodynamic Modeling, ., 0, 0, - (2002)
Optimization of CaO-MnO-SiO2-Al2O3 Quaternary System and Its Application to Ferroalloy and Steelmaking Processes, ., 0, 0, - (2002)
Thermodynamic Optimization of the MnO-SiO2-Al2O3 System and Its Application to Inclusion Control in Mn/Si Killed Steels, ., 0, 0, - (2001)
Oxide Database Development for FactSage, ., 0, 0, - (2001)
Prediction of Inclusions Composition in Molten Steel Using Computational Thermodynamics, ., 0, 0, - (1999)

단행본

한권으로 끝내는 소재 시뮬레이션, 버추얼 랩, 244, 강윤배 (2021)
FIRE Compendium Series: Corrosion of refractories, FIRE, ~400, KANG, YB (2016)

연구실적

RESEARCH ON THE EXTRACTION OF LOW PHOSPHORUS CONTAINING FEMN ALLOY THROUGH MOLTEN SULFIDE FORMATION, 포항공대산학협력단 (2010-2011)
세라믹소재 열역학DB구축, 한국세라믹기술원 (2010-2011)
산소 LANCE 및 취련 PATTERN 기술, (주)포스코건설 (2011-2011)
연구개발과제, 포항공과대학교 (2011-2016)
철스크랩내 불순원소 정련을 위한 기초 연구, 포스코홀딩스(주) (2011-2013)
FE-MN-AL-Y계 초경량 HYBRID STEEL 열역학 DATABASE 구축, 포스코홀딩스(주) (2012-2013)
철스크랩 및 동제련 슬래그 재활용에 관한 연구, 포스코홀딩스(주) (2013-2014)
CALCINE 조건 (온도, 환원율, 조성) 변화에 따른 노내 용융 속도 해석, 주식회사 에스엔엔씨 (2013-2013)
용철 액적/가스/플럭스 반응을 이용한 정련기술 개발, 포스코홀딩스(주) (2013-2014)
MODELING OF SURFACE TENSION OF MULTICOMPONENT LIQUID STEEL AND DEVELOPMENT OF COMPUTATIONAL CODE FOR THE SURFACE TENSION CALCULATION, 포항공대산학협력단 (2013-2014)
용강/몰드 플럭스간의 계면 장력에 관한 연구, 재단법인한국연구재단 (2013-2014)
기술료 연구개발재투자과제, 포항공대산학협력단 (2013-2014)
개재물 저감을 위한 턴디쉬 용강유동 적정성 평가, 포스코홀딩스(주) (2013-2014)
철스크랩 및 동제련 슬래그 재활용에 관한 연구, 포스코홀딩스(주) (2014-2015)
고철 함유 용철 중 불순원소의 표면 거동에 관한 연구, 포항공대산학협력단 (2014-2015)
용철 액적/가스/플럭스 반응을 이용한 정련기술 개발, 포스코홀딩스(주) (2014-2015)
용강/몰드 플럭스간의 계면 장력에 관한 연구, 재단법인한국연구재단 (2014-2015)
기술료 연구개발재투자과제, 포항공대산학협력단 (2014-2015)
4.9974 이월과제, 재단법인한국연구재단 (2014-2015)
극저탄 노즐막힘 원인인자 규명 및 저감방안 도출, 포스코홀딩스(주) (2015-2016)
(전사) FINEX 용융로 내 철스크랩 불순원소 정련 거동 연구 (1/1), 포스코홀딩스(주) (2015-2016)
고철 불순원소 정련을 위한 용철의 열역학 연구, 포항공대산학협력단 (2015-2016)
연구개발과제[2015년 신설], 포항공과대학교 (2015-2042)
다원계 용강/플럭스 간 반응 예측 모델 개발, 포항공대산학협력단 (2015-2016)
(집담회)BIG DATA 분석을 이용한 제조업 변화, 포항공과대학교 (2015-2016)
전기장 인가를 통한 용선/용강 탈황능 증대 기술 (미래혁신과제 FEASIBILITY STUDY ), 포스코홀딩스(주) (2016-2017)
[기술개발비과제]융융 고철 중 불순 원소의 저온 기화 거동, 포항공대산학협력단 (2016-2017)
연주 침지노즐과 용강 및 개재물과의 계면 반응에 대한 연구, 포스코홀딩스(주) (2016-2017)
폭 중앙부 결함 저감을 위한 최적 유동 패턴 도출, 포스코홀딩스(주) (2016-2016)
사회 안전 확보를 위한 700MPA급 철근 활용 내진용 철근콘크리트 개발, 고려대학교산학협력단 (2016-2016)
탄소포화 조건에서의 메탈/슬래그 크롬 분배 거동 해석, 포스코홀딩스(주) (2017-2017)
FLUX에 따른 개재물 제거 효율 향상을 위한 속도론적 연구, 포스코홀딩스(주) (2017-2018)
극청정강 제조를 위한 신개념 개재물 제어 기술 기반 연구, 포스코홀딩스(주) (2017-2018)
[기술개발비]CALCIUM ALUMINATE계 용융 산화물 내 알루미나 용해 속도의 해석, 포항공대산학협력단 (2017-2018)
극저탄 연속 주조용 침지노즐 막힘 개선용 노즐재질 개발, 포스코홀딩스(주) (2017-2018)
FETI, 가탄재 투입에 따른 용강중 개재물 생성거동 규명, 포스코홀딩스(주) (2018-2019)
MGO계 내화물의 용강 중 혼입 기구 규명, 포스코홀딩스(주) (2018-2019)
저급원료 사용량 증대를 위한 용선중 잔류원소 정련기술 연구(장기기초과제), 포스코홀딩스(주) (2019-2020)
[4.17558_기술개발]슬래그 전기장 인가를 통한 용철 정련능 향상 탐색 연구, 포항공대산학협력단 (2019-2020)
TI 첨가 극저탄 개재물성 결함 기원 추적 기초 연구, 포스코홀딩스(주) (2019-2020)
[4.18955_기술개발]극저탄 용강 중 용존 산소 분석 기술 개발, 포항공대산학협력단 (2019-2020)
TI 첨가 극저탄소강 노즐 막힘 / 표면 결함 유발 개재물의 생성 거동 이해를 위한 열역학 연구, 포스코홀딩스(주) (2019-2020)
FINEX 공정 중 함철 부산물내 ZN 거동 해석, 포스코홀딩스(주) (2020-2020)
저급원료 사용량 증대를 위한 용선중 잔류원소 정련기술 연구(장기기초과제), 포스코홀딩스(주) (2020-2021)
[4.19852_기술개발]FINEX 용융로 슬래그내 ZN 용해도 탐색 연구, 포항공대산학협력단 (2020-2020)
[4.19856_기술개발]최고급 무방향성 전기강판 소재 고온압축 거동 연구, 포항공대산학협력단 (2020-2021)
알루미늄/실리콘 탈산강의 턴디시내 SHROUD NOZZLE 주위 나탕 발생시 용강 청정도 평가 모델 개발, 포스코홀딩스(주) (2021-2021)
[4.21091_기술개발]알루미늄/실리콘 탈산강의 턴디시내 SHROUD NOZZLE 주위 나탕 발생시 용강 청정도 평가 모델 개발, 포항공대산학협력단 (2021-2021)
(전사) 건식 제련 공정을 활용한 폐 리튬 이온 배터리 내 리튬 이온 회수 타당성 기초 연구 (1/1), 포스코홀딩스(주) (2021-2021)
[4.21933_기술개발]건식 제련 공정을 활용한 폐 리튬 이온 배터리 내 리튬 이온 회수 타당성 기초 연구, 포항공대산학협력단 (2021-2021)
저탄소 배출 – 저원가 조업 철강 생산을 위한 난제거 성분 제어 기초 연구, 재단법인한국연구재단 (2021-2022)
ALON-BN계 침지 노즐과 극저탄소강 계면 반응 기구 해석, 조선내화(주) (2021-2023)
C-X 화합물 열분해용 고효율 지속 가능 액체 금속 촉매 개발 및 특성 평가, 재단법인한국연구재단 (2021-2021)
(전사) 알루미늄/실리콘 탈산강의 턴디시내 SHROUD NOZZLE 주위 나탕 발생시 용강 청정도 평가 모델 개발 (2/2) (2/2), 주식회사 포스코 (2022-2022)
[4.23152_기술개발](전사) 알루미늄/실리콘 탈산강의 턴디시내 SHROUD NOZZLE 주위 나탕 발생시 용강 청정도 평가 모델 개발 (2/2) (2/2), 포항공대산학협력단 (2022-2022)
C-X 화합물 열분해용 고효율 지속 가능 액체 금속 촉매 개발 및 특성, 재단법인한국연구재단 (2022-2022)
(양소) 전기로 연계 제강공정 TRAMP 원소 정련 기술 개발 (1/3), 주식회사 포스코 (2022-2023)
저탄소 배출 – 저원가 조업 철강 생산을 위한 난제거 성분 제어 기초 특성 연구, 재단법인한국연구재단 (2022-2023)
[4.23305_기술개발](양소) 전기로 연계 제강공정 TRAMP 원소 정련 기술 개발 (1/3), 포항공대산학협력단 (2022-2023)
4.0022778_이월과제, 재단법인한국연구재단 (2022-2022)
4.0022620_이월과제, 재단법인한국연구재단 (2022-2023)
(전사) 저탄소 제강 프로세스 기술 동향 및 전망 (1/1), 주식회사 포스코 (2022-2023)
[4.24852_기술개발]저탄소 제강 프로세스 기술 동향 및 전망 (1/1), 포항공대산학협력단 (2022-2023)
철 스크랩 기반 저탄소 철강 제조 공정시 구리와 주석의 영향 평가를 위한 열역학 모델링 연구, 재단법인한국연구재단 (2022-2023)
LIB 공정 SCRAP 및 사용 후 LIB 재활용을 위한 공정 설계용 열역학 데이터 베이스 구축, 주식회사 포스코 (2022-2023)
(포항) 전기강판 PNX재 냉각제 및 합금철 내 CA 영향에 따른 개재물 생성 거동 규명 (1/1), 주식회사 포스코 (2023-2023)
[4.25338_기술개발](포항) 전기강판 PNX재 냉각제 및 합금철 내 CA 영향에 따른 개재물 생성 거동 규명 (1/1), 포항공대산학협력단 (2023-2023)
(양소) 전기로 연계 제강 공정 TRAMP 원소 기화 정련 기술 개발(2/3) (1/1), 주식회사 포스코 (2023-2024)
[4.25561_기술개발](양소) 전기로 연계 제강 공정 TRAMP 원소 기화 정련 기술 개발(2/3) (1/1), 포항공대산학협력단 (2023-2024)
C-X 화합물 열분해용 고효율 지속 가능 액체금속촉매 개발 및 특성 평가, 재단법인한국연구재단 (2023-2023)
저탄소 배출 – 저원가 조업 철강 생산을 위한 난제거 성분 제어 기초 특성 연구, 재단법인한국연구재단 (2023-2024)
4.0023769_이월과제, 재단법인한국연구재단 (2023-2024)
LI이온 이차전지 양극재 유래 LI침출기술검토 및 도출기법 조사, (재)포항산업과학연구원 (2023-2024)